Skip to content
R. de Siebenthal & Fils SAMachining workshop · Bex · since 1932

Services

SKF regional dealer

For more than 50 years, alongside machining, we have sold bearings of every type and advised on their use and fitting: ball, roller and needle bearings, housings, spherical plain bearings, GLYCODUR plain bearings, fitting and dismounting sleeves, lock washers, balls, rollers, needles, and SKF fitting and inspection tools.

SKF+41 24 463 22 28

Lead times

Bearings not held in stock

Lead times are indicative, subject to prior sale.
Express
Delivered the same afternoon for orders before 11:30
Standard
Next morning, for standard bearings from Swiss stock
3 days
All standard European production from the SKF distribution centre in Belgium
1 week or more
Depending on type, tolerances or stock shortages; replacement possible with another European make

Always in stock

Bearings and accessories

  • Single-row deep groove ball bearings, bore 3 to 60 mm: series 600, 6000, 6200, 6300, open, shielded one side (Z), both sides (2Z) or sealed both sides (2RS)
  • Thrust ball bearings, series 51000
  • GLYCODUR plain bearings, types F and PCM
  • KM lock nuts
  • MB lock washers
  • SIMMERING shaft seals for shafts from 8 to 90 mm
  • SEEGER circlips for shafts from 3 to 90 mm and bores from 10 to 90 mm

For emergencies

Fasteners and bar stock

  • Fasteners in 8.8 and 12.9 steel and in stainless steel, from M1.6 to M16: bolts, screws, nuts, washers
  • Hardened, taper and spring pins, keys, grease nipples, HELICOIL thread inserts

About 2.5 tonnes of bar stock, round and hexagonal bars, flats and tubes, for our own use and for emergencies:

Structural, case-hardening and hardening steels
Ac37-2, Ac52-3, Ck45, ETG100, 34CrNiMo6, 30CrNiMo8, 42CrMo4, 16MnCr5, 17CrNiMo6, 9MnSPb36, 100Cr6, 1.2510, 1.2380, 1.2343
Stainless steels
1.4057, 1.4301, 1.4305, 1.4435
Brass and bronzes
LB50, LAB75, CuSn8
Aluminium
Anticorodal, Peraluman, PB109, AA7075, CONTAL, CERTAL
Plastics
PVC, PP, PC, PA, PE, POM, HD-PE, PMMA, PTFE, PVDF, PI, PPS, PEEK
In very small quantities
STUMATIT, MACOR, Hastelloy, titanium grade 5 and grade 2, tantalum, nickel